Product details
Highlights
Why choose FilaDryer S2?
The Sunlu FilaDryer S2 has a stylish round design with enough space to fit 1 kg spools of filament. It even includes rollers on the bottom and a hole allowing you to run filament straight out of the dryer. There is a large touchscreen display on the side jam-packed with info, including the set temperature, current temperature, running time, material, and humidity level inside of the FilaDryer S2.
The temperature range of the Sunlu FilaDryer S2 is 35-70 degrees Celsius with a heating element on the top and bottom to heat your spools evenly. It is compatible with 99% of 3D printing filaments on the market, including PLA, PLA+, PETG, ABS, Nylon, and more.
Printing 3D models is a frustratingly fun hobby as there are variables to consider and lots of settings to tweak in order to get the best results. The last thing you want to do is throw in another variable, like wet filament if you can avoid it. The Sunlu FilaDryer S2 is a simple and affordable way to eliminate hours of troubleshooting your printer when looking for an issue that isn’t there. If you live in a humid area, then this could be a lifesaver, and also save you a lot of money on wasted filament. If you are one of those who like to pick up rolls on sale but don’t use them immediately, then you’re looking at a lot of wasted filament unless you dry it out.
Up to 70℃
What SUNLU S2 different from others is that it heats up to 70℃, which makes it ideal for special filaments like PA/PC. 360-degree heating makes heating twice as fast as most dryer boxes on the market.
Improving Your 3D Prints Quality
Wet 3D printing filament will cause stringing, clogging, poor adhesion, and Layer Shift. SUNLU S2 3D Filament Dryer Enclosure can dry while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3D filaments.
Personalized Temperature Setting
The user can adjust the temperature of the drying box according to different 3D filament types, ambient temperature, humidity, and other factors. Adjustable temperature range 35℃~70℃. Commonly used 3D filament on the market under normal circumstances only needs 3-6 hours of trying to achieve a good printing experience and printing effect.
Wide Compatibility
There are 2 points that make this dryer box wide compatible: 1. The maximum capacity of the SUNLU S2 dry box is Φ210*85(H)mm. 2. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
SUNLU Filadryer S2 makes your filament alive again
Get moisture out of filaments. It can help you get better printing results. Enjoy the fun of 3D printing!
Big Touch Screen
SUNLU Filadryer S2 has a 4.6-inch LCD touchscreen. You can easily see all settings like Heating Temp, Time, dryer Filament Type, and LED Light. All settings just need one click.
360° Circular Heating
360° circular heating way can fully dry moisture filaments and improve printing effects greatly.
Moisture is not a problem at all
SUNLU Filadryer S2 is designed to help you solve printing problems like Clogging, Layer shift, Stringing, and adhesion.
Specifications
| General |
Brand: SUNLU |
| Specification |
Maximum capacity: φ210*85mm |
| Suggested Drying Temperature |
PLA, PLA+, WOOD, PETG : 45-50℃ PVB, ABS, HIPS, PVA, TPU, PMMA: 50-55℃ PA, PC: 60-70℃ |
| Weight & Size | Product Weight: 1190g(Including power adapter) Package Weight: Product Size(L x W x H): 265 X274 X 118 mm Package Size(L x W x H): |
| Package Contents |
1 x SUNLU S2 Dryer Box of 3D Printer Filament |
al***s –
I think this filament dryer is a winner, and aside from the caveats about drying out the dessicant packages before drying your filament, and some non-intuitive design choices in the UI, its a good investment for 3D printer owners. Way better than baking your filament in the oven!
Ev***e –
Ich mag diesen Trockner sehr! Er macht das Trocknen Ihres Lieblingsfadens zu einem Kinderspiel.
Jo***o –
The display is bright and easy to read, and it generally seems to work well. There is a fistful of dessicant packs inside the dryer, and I wasn’t sure if it was just for packing or if they are to help with storing filament in the dryer. Turns out it is the latter. The packs eventually soak up water and can be “recharged” by baking them to have them release the moisture.
Ai***e –
Urządzenie ma czystą i prostą konstrukcję. Pokrywa łatwo się otwiera, a wyświetlacz ma duże, podświetlane znaki, które są łatwe do odczytania.
Ma***n –
Touch screen works well I tried it last night I had a spool of petg in the dryer and it worked great. The filament dryer is easy to figure out and very quit while in use. I do like the led light nice feature if you don’t want it on you can turn it off. Definitely worth it you won’t be disappointed.
Ha***y –
The unit is easy to knock over, so I would look at a way to keep it sturdy so you don’t knock it over.The included power supply is rated to about 50W, so the unit doesn’t take much power which is nice.Recommended!
Jo***n –
This sunlu s2 is a great filament dryer. There is a mod on printables to make it even better. Shows the humidy and allows you to select the type of filament you want to dry. Highly recommed especially for someone who is getting into 3d printing and wants that set and forget type use.
Ad***y –
Werkt geweldig, al ons filament gaat hier doorheen en we hebben geen problemen gehad. Een echte aanrader.
Zo***s –
I have the previous model which takes forever to dry filament. I bought the sunlu s2 with the fan and its amazing. I havent had any more issues with wet filament.