Creality Falcon 2 40W Laser Engraver

Highlights

Creality Falcon2 40W Laser Engraver Main Features 

Creality Falcon 2 40W, an upgrade to the 22W variant, is the world’s first laser engraver to incorporate an adjustable light beam feature.   If you are looking for a laser cutter that offers high performance, then look no further than the  Creality Falcon2 40W as it incorporates a number of breakthrough features, such as adjustable spot adjustment for higher work efficiency and finer work details. 

All these allow the pot size of the Creality Falcon2 40W to be adjusted according to engraving and cutting requirements. Therefore, the laser engraver is particularly well suited to cutting thicker objects with a full-power laser spot, and engraving and cutting thinner objects with a small spot.

• 40W Laser Power 
• Automatic Air Assist
• 25000mm/min Max Engraving Speed
• Adjustable Laser Spot
• 400*415mm Engraving Size 
• Triple Monitoring Systems
• Bidirectional limit switch

40W Most Powerful So Far

Based on the latest FAC spot compression technology, 8 powerful 5.5W laser diodes are compressed to increase the laser power to 40W.

Adjustable Light Spot

This feature allows for adjusting the light spot size, resulting in a more refined workpiece. Large light spots are better for cutting thicker objects efficiently, while small light spots are preferable for engraving and cutting thinner ones.

25000mm/min Amazing Speed

With 100% improvement in carving efficiency, Falcon 2 allows you to spend less time creating more.

Add Some Colors to Your Works

Experience the magic of laser engraving on stainless steel, as the super powerful laser beam heats the metal surface, producing a mesmerizing and vibrant spectrum of colors.

Integrated Air Assist

You can adjust the air assist either manually using the knob or automatically through LightBurn software to obtain a cleaner result while protecting the laser lens from smoke. Strong airflow is recommended for cutting, while weak airflow is ideal for engraving.

Extensive Compatibility

Compatible with a variety of systems, including Windows and macOS systems, and software such as LaserGRBL and LightBurn.

Triple Monitoring Systems

Airflow monitoring indicates the current airflow volume. It enables you to adjust the airflow based on your engraving needs.
The built-in lens monitoring system will trigger an alarm when the lens is dirty enough, which helps avoid lens breakage and frequent replacement.
When a flame is detected, the indicator will flash red with an alarm and the machine will stop immediately.

Offline Creating & Offline Dynamic Preview

Creality Falcon 2 supports offline creation, and you can feel free to create anytime, anywhere. Also, it can position and adjust precisely without connecting to a computer. Short press to fine-tune 1mm, and long press to adjust 10mm/s.

More Safer

Creality Falcon 2 40W laser engraving machine has a bidirectional limit switch, active stop function, security lock design, emergency stop button, and laser protective cover.

Creality Falcon2 40W – Mighty but Precise

• Pro-tech for Pro-work 
• 40W Strong Power 
• Adjustable Light Beam
• Magical colorful engraving 
• 25000mm/min 
• New integrated air assist 
• Triple monitoring systems 
• Five safety protections 
• Pre-assembled structure 
• Offline dynamic preview 
•  

Adjustable Light Beam

The light beam can be adjusted according to the engraving and cutting needs, making the work more refined.

40W Most Powerful So Far

Based on the latest FAC spot compression technology, 8 powerful 5.5W laser diodes are compressed to increase the laser power to 40W. 

• Cut 20mm wood with one pass. 
• Cut 30mm black acrylic with one pass.
• Cut 0.15mm stainless steel sheet with one pass.

25000mm/min Engraving Speed 

With 100% improvement in carving efficiency, Falcon 2 40W allows you to spend less time creating more.

Add Some Colors to Your Works 

When the stainless steel is heated by a super powerful laser beam, the metal surface will physically react and produce hundreds of colors, bringing your works to life.

Groundbreaking Integrated Air Assist

The integrated air-assist function not only offers step-less adjustment but can also automatically adjust the airflow through LightBurn software to meet different cutting and carving needs.

Triple Monitoring Systems

Five additional safety protections are added to the Falcon2 40W for greater security and peace of mind. The bidirectional limit switch ensures that, if the laser hits the boundary, the laser engraver will stop automatically and a buzzer will sound an alarm. An active stop function is also added, automatically stopping the Falcon2 40W in case of accidental tilt, flip or drop, sounding an alarm, and sending an alert in the process. A security lock design, emergency stop button, and laser protective cover are also incorporated for added safety and security.

Specification